Description

Contemporary bar rail brackets combine a stylish, modern appearance with the versatility of a bracket that can either be mounted to the face of your bar or to the floor in front of your bar.

Built from stainless steel with a blackened finish, this contemporary bracket, Blackened Steel 2" metal tubing, and other matching components is a luxurious, convenient addition to any home or commercial bar.

For bar mounted applications, contemporary bracks use three mounting screws and a threaded bolt that mounts from behind the bar to create a modern look where your metal bar rail tubing looks as if it is floating next to the bar. The threaded bolt is what provides the added weight support to secure your foot rail in place. It gives you the convenience of being able to choose the height of your bar rail while also allowing you to maintain a clean floor and eliminate the worry of guests stubbing their toes on floor brackets.

If you go with the floor-mounted installation method, you only need to use the mounting screws to secure the brackets to your surface. This way you can avoid disturbing the look of your bar face, and customize the distance between your bar rail and the front of your bar. Having your brackets mounted to the floor is also a good option if your bar face is unable to support your bar rail properly or you are unable to access the back of your bar face.

Be sure to carefully measure where each bracket will be placed before drilling into your bar face or floor. For proper support, bar brackets should be placed at each end of the tubing, plus one for every 4-foot increment.

For help deciding which bracket will work best for your bar project, check out our bar foot rail brackets guide for more information on each of the options.

Please note: This is a custom order item. Please allow 4-6 weeks for delivery

Bar Mount Installation instructions:

Contemporary brackets include a nut and bolt assembly to properly support the weight. To ensure adequate support, a solid backing at least 3/4” deep is required.

1. Measure & mark holes for mounting screws and for the threaded bolt.
2. Drill hole in bar diewall for the threaded rod.
3. Attach bracket from behind bar face using rod and secure with bolt and washer.
4. Attach brackets to the face of the bar with the 3 mounting screws.
5. Secure tubing to bracket by fastening set screws through hole in the bottom of bracket.

Floor Mount Installation instructions:

1. Measure & mark holes for mounting screws.
2. Attach brackets to the floor with the appropriate mounting screws.
3. Secure tubing to bracket by fastening set screws through hole in the bottom of bracket.

For more detailed instructions on how to install bar rail read our guide to planning & installing. 

Care & Maintenance:

Care and maintenance of bar foot rail varies by finish. Given the nature of the product, typical wear and tear may be noticed with your bar rail over time, such as scuffs, scratches and dirt. Our guide to cleaning & maintenance on how to properly prep, clean & maintain all bar rail finishes.

Features

Specifications

Includes

Shipping & Delivery

Warranty

Downloads

Attention CA Residents:  Prop 65 Warning >

Attention CA Residents: Prop 65 Warning

×

This product may contain a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Questions & Answers