KegWorks Homepage
SKU: BLK-990-XX-1.5SQ
Bar Foot Rail Tubing - Matte Black - 1.5" - Square
-
Add the modern look and comfortable feel of square bar foot rail to any bar or kitchen project with this 1.5” x 1.5” stainless steel square tubing.
Constructed from sturdy 304 stainless steel, this ultra-durable stainless steel bar foot rail has a matte black look to give it a contemporary finish. It’s ideal for home and commercial bar rail projects, kitchen islands, banquette seating, or decorative handrail.
This style of square tubing and components are easy to install because it requires no welding to connect sections of tubing or mount them to surfaces. To properly install it along your bar, just use your chosen style of bar rail bracket. Be sure to carefully measure where each one will be placed before drilling into your bar, wall, or floor. Bar brackets should be placed at each end of the tubing for proper support, plus one for every 4-foot increment.
You can easily connect two tubing sections with an internal splicing sleeve. The seam between the two joined pieces is then covered by a bracket over the joint. You can also wrap this square bar foot rail around the corners of your bar or seating area with a 90-degree elbow fitting.
When ordering tubing, it’s always wise to round up to the nearest foot. If your bar is not an even full foot increment but instead has some inch increment (i.e. 6'2", 7'2") you will need to order up to the next foot. So if your bar is 3'2" you will need to order a 4-foot piece of tubing; if your bar is 7'2", you will need to order an 8-foot piece of tubing, and so on. If this is the case, you will need to cut the rail with a miter saw prior to installation.
By using this 1.5" x 1.5" matte black bar rail tubing, completing a DIY bar foot rail or handrail installation is easier than it sounds. These metal handrails allow you to achieve a consistent look throughout your bar with matching components.
Please note: Building a bar outside? We’ve got you covered! The Matte Black finish on this bar foot rail is suitable for both indoor and outdoor environments. -
- Square-shaped steel tubing for bar foot rails
- Made of 304-grade stainless steel
- Contemporary powder coated Matte Black finish
- Matching components available
- Ultra-durable and maintenance-free
- Adds a touch of style to any bar
- Makes your bar more comfortable for guests
- Can be used for either bar foot rail or bar arm rests
- Suitable for indoor or outdoor use
-
- Dimensions: 1.5" x 1.5"
- Wall thickness: .050"
- null
- null
- null
- null
- Attention CA Residents: Prop 65 Warning >
This product may contain a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Similar Products You Might Also Like
Additional Items Customers Also Viewed
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.